Name: Grow K220 DC10-24V Two Relay with Administrator/User Fingerprint Access Control Board
Brand: Grow K220 DC10-24V Two Relay with Administrator/User Fingerprint Access Control Board
SKU: Grow K220 DC10-24V Two Relay with Administrator/User Fingerprint Access Control Board
Rating: 4.8 (135 reviews)

Detail Information

Model NO.:	K220	Screen:	As Picture
Communication Interface:	RS232, USB, TCP/IP	Fingerprint Capacity:	200
Power Supply:	DC 10V--24V	Standby Current:	<10mA
Output:	Relay(Max. Current:10A)	Transport Package:	Standard Export Carton Package
Specification:	Power Supply: DC 10V--24V	Trademark:	GROW
Origin:	China	HS Code:	8471609000
Supply Ability:	5000	Voice Service:	Without Voice Service
Clock:	Without Clock	Color:	As Picture
Samples:	US$ 10/Piece 1 Piece(Min.Order) \|	Customization:	Available \| Customized Request
Shipping Cost:	About Shipping Cost And Estimated Delivery Time.	Payment Method:	Initial Payment Full Payment
Currency:	US$	Return&refunds:	You Can Apply For A Refund Up To 30 Days After Receipt Of The Products.

Product Description

Technical Parameters

·Power supply: DC10V--24V

·Stand-by mode current: <10mA

·Output: Relay(Max. current: 10A)

·Fingerprint capacity: 200 pieces

·Relay Time: 0.5s-60s or over 60s - In normally open mode-press finger-relay open,press again-relay closed

Operation Instruction

1.SET Button(K1-K2)
1.1 Register Administrator Fingerprint:Press SET button shortly,system in administrator register status and blue indicator light flash fast, put the same finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful. Fingerprint can be registered continuously. If no need for adding fingerprint, waiting a few seconds to exit.

1.2 Delete Fingerprint:
1.2.1 Delete single relay position fingerprints:Long press the corresponding SET button,blue indicator light flash fast,hear long "Di" beep, loosen the finger, the relay indicator light on and hear music, means this location of the admin and user fingerprints are deleted;
1.2.2 Delete all relay position fingerprints(Back to factory default):Long press any SET button to hear long "Di" beep twice, loosen the finger,all indicator light on, means initialization operation successful,back to factory default.

2.Register User Fingerprint:Press the administrator fingerprint about 10 seconds until hear the music and blue indicator light flash fast,means can add user fingerprint. Put the same user finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful. Fingerprint can be registered continuously. If no need for adding fingerprint, waiting a few seconds to exit. (Note:The storage location of the user's fingerprint depends on the storage location of the administrator's fingerprint; If the administrator's fingerprint is stored in No.1 and No.2 at the same time, the user's fingerprint will be stored in No.1 by default.)

3.Delete User Fingerprint:Press the administrator fingerprint about 20 seconds until hear "Di-" and music,means user fingerprints at this location are deleted. (Note:The delete location of the user's fingerprint depends on the storage location of the administrator's fingerprint. If the administrator's fingerprint is stored in No.1 and No.2 at the same time, the user fingerprints in No.1 will be deleted by default.)

4.Set Relay Time:Rotate S1 or S2 to set the closing time of the relay from 0.5 to 60 seconds. When over 60 seconds, it will in the normally open normally closed state,relay operated when fingerprint passed, and then relay released when fingerprint passed again, relay operated and released circularly. The relay is contact output, switch signal, no voltage output.

5.Usage:Press the finger,the relay closes after the fingerprint passes, and the closing time is determined by S1 or S2.

Note:
1. All indicator lights are off in standby state, and the lights are on in working state;
2.If want to close the module indicator light when in the normally open mode, long press any SET button to hear long "Di" beep three times. Repeat this action to open.

K220 can be used together with R502,R502-A,R502-AW,R503 fingerprint module

Grow K220 DC10-24V Two Relay with Administrator/User Fingerprint Access Control Board

Place of Origin:	China
Certification:	CE

Minimum Order Quantity:	1
Packaging Details:	Carton
Delivery Time:	Peak Season Lead Time: within 15 workdays Off Season Lead Time: within 15 workdays
Payment Terms:	T/T, PayPal
Supply Ability:	5000

Grow K220 DC10-24V Two Relay with Administrator/User Fingerprint Access Control Board

Technical Parameters

Operation Instruction

Grow KL216+R503 Two-Color Ring Indicator Fingerprint Access Control

Grow KS200+R503 Two-Color Ring Indicator Fingerprint Access Control

Grow KS200 Fingerprint Access Control Board

Grow KS200+R502-A Circular Ring LED Fingerprint Access Control Board

Grow K215-V1.3+R502-AW Fingerprint Access Control Board for Car

Grow K215-V1.3+R502-A Fingerprint Access Control Board for Car

Grow KL216+R502-A Round LED Fingerprint Access Control Board

Grow K202+R502-A DC12V Fingerprint Access Control Board